What the Tantus Suction Cup actually does
The Tantus Suction Cup is a silicone accessory that turns a compatible vibrator into a stationary toy—and back again. It is not a vibrator itself. You push the stem into the base of your toy, then press the cup onto a surface so the toy stays put while you use it.
The supplied record lists compatibility with all Tantus vibrator toys, Vixen vibrator toys, Topco bullet vibrator toys, and many others. If your toy is not on that list, check the base opening before you buy; the record does not provide a universal fit guarantee.
Measurements that guide the fit
- Suction Cup: Base: 3 inches; stem: 2 inches; stem diameter: .62 inches (5/8 inch); stem rings: .75 inches (3/4 inch). These are the only dimensions supplied. Compare the stem diameter and ring size with your toy’s base opening rather than guessing from the product photo.

Suction Cup - Suction Cup: Made of 100% Ultra-Premium Silicone. Silicone is the material you will clean and store, and it is why the lube warning below matters.
How to attach the suction cup to your vibrator
- Check the base opening: The stem is 2 inches long with a .62-inch (5/8-inch) diameter and .75-inch (3/4-inch) rings. If your toy’s base opening is much narrower or wider than the stem, the cup may not seat securely. The supplied information does not list every compatible toy, so test the fit before relying on it.
- Press the stem into the toy: Push the stem into the base of the vibrator until it feels seated. The record does not specify a twist-lock or click, so use a firm, straight push and check that the toy hangs straight.
- Clean and dry both surfaces: Wipe the cup and the mounting surface so they are free of dust, lint, or moisture. A clean, smooth surface gives the suction cup its best chance to hold. The record does not provide a cleaning procedure beyond the material note, so use a silicone-safe cleaner and avoid silicone lube on the cup.
- Press and hold the cup: Place the 3-inch base flat against the surface and press firmly to push out air. The record describes the cups as “damn sturdy when you stick ’em,” but it does not give a hold time or weight rating. Give it a gentle tug before you let go.
Where to stick it: surfaces that work and ones to skip
The product description names the tub, wall, hall, floor, and door as possible spots. Those examples point to smooth, non-porous surfaces: glazed tile, glass, polished metal, and painted doors are the usual candidates. Rough concrete, fabric, and heavily textured walls give a suction cup little to grab.
For hands-free vibrator positioning, start low and close to where you will be. A cup mounted at chest height on a door is harder to reach and easier to knock loose than one placed on the tub wall or floor at hip height. The record does not provide a recommended height or angle, so adjust by comfort and test the hold before you put weight or pressure on the toy.
Suction cup placement tips for a steadier hold
- Choose a smooth, flat area: Curved or grouted surfaces leave gaps under the 3-inch base. Pick the flattest patch you can find.
- Keep the cup clean: Dust and soap film break the seal. Rinse and dry the cup after each use.
- Press from the center out: Start at the middle of the base and work outward to push trapped air toward the edge.
- Re-seat if it wobbles: The record notes a newly improved design with no uneven bottoms or occasional wobbles, but any cup can lose its seal if the surface is not flat. Lift, clean, and press again.
Lube, cleaning, and storage
The supplied record includes one clear compatibility warning: not recommended with silicone lube. Silicone lube can affect silicone accessories, so choose a different lubricant for the toy and keep silicone lube away from the cup itself.
For cleaning, the record only confirms the material is 100% Ultra-Premium Silicone. It does not give a temperature, soak time, or dishwasher instruction. Wash the cup with a mild silicone-safe cleaner, rinse, and let it air-dry completely before storing it. Store it away from sharp edges and direct sun so the base stays flat.
Tantus Suction Cup at a glance
- Suction Cup: Compatible with all Tantus vibrator toys, Vixen vibrator toys, Topco bullet vibrator toys, and many others. This is the supplied compatibility list. If your toy is outside it, verify the base opening against the stem dimensions before buying.
- Suction Cup: Catalog price: USD 18.60 (comparison price USD 31.00). A low-cost accessory that can make an existing compatible vibrator stationary without replacing the vibrator.


