POP by Tantus PT3 Powder: How to Mix and Use It
By Tantus Inc. Good Clean Fun | Published: 2026-10-31
Category: How-to Guides
Learn how to use POP by Tantus PT3 Powder to keep Pop Dildo assembly and disassembly smooth, with practical steps for applying this talc-free silicone powder.
Quick answer
Apply a light, even dusting of POP by Tantus PT3 Powder to the connecting surfaces of your Pop Dildo before assembly. A little goes a long way—start with a small amount and add more only if needed.
Why PT3 Powder Is Different from Lubricant
PT3 Powder is a dry application made with natural ingredients and is 100% talc-free. Unlike liquid lubricants, it leaves no wet residue and is designed specifically for the Pop by Tantus tube system. Using a wet lubricant on these parts can attract dust and make the connection feel sticky, so keep the powder dry and store it away from moisture.
What to Do If You Can’t Find PT3 Powder
Because POP by Tantus PT3 Powder is a discontinued item, availability may be limited. If you cannot find it, do not substitute a talc-based powder or a silicone-based lubricant without checking compatibility with your toy. A small amount of cornstarch can work as a temporary alternative, but test it on a small area first and clean thoroughly afterward.
How to Apply PT3 Powder Step by Step
- Clean and dry the Pop Dildo parts: Wash the tube and connecting pieces with mild soap and warm water, then let them air-dry completely. Any moisture can cause the powder to clump. Check that all surfaces are fully dry before applying powder.
- Dispense a small amount of powder: Lightly tap the bottle to release a small amount onto a clean surface or directly onto the connecting end of the tube. Avoid pouring a large pile. Start with less than you think you need—you can always add more.
- Spread the powder evenly: Use a clean finger or a soft cloth to distribute the powder thinly over the area where the parts slide together. Focus on the insertion point and any threads or grooves. A thin, even film works better than a thick layer.
- Assemble and test the fit: Gently push the parts together. If resistance is felt, disassemble and add a tiny bit more powder. Do not force the connection. If it still sticks, clean off the powder and reapply—excess powder can cause grittiness.
- Wipe away excess powder: After assembly, use a clean dry cloth to wipe away any visible powder on the outside of the toy. This prevents transfer to hands or storage. Store the toy only after excess powder is removed.
Product facts
- POP by TANTUS PT3 Powder: POP by Tantus PT3 Powder is made with natural ingredients and is 100% talc-free. This makes it a safer choice for personal use compared to talc-based powders.
POP by TANTUS PT3 Powder - POP by TANTUS PT3 Powder: The powder lubricates Pop by Tantus Tubes for easy insertion and removal. Applying it correctly helps the Pop Dildo assemble and disassemble smoothly without sticking.
