How to Use Swiss Navy Water Based Lubricant Foil

1. Locate the Tear Notch: Hold the foil packet with the printed side facing you. Find the small notch or cut mark along one edge. This is the intended opening point. Do not use scissors or teeth—tearing at the notch gives a clean, controlled opening.
2. Tear and Squeeze: Firmly pinch the packet on both sides of the notch and tear straight across. Squeeze the gel onto your fingers, directly onto a toy, or onto your partner&#39;s skin. Squeeze gently to avoid spilling. The gel is thin and can run if you squeeze too hard.
3. Spread Evenly: Use your fingers or the toy to spread the lubricant over the area you intend to use. A little goes a long way—start with half the packet and add more if needed. Water-based lube dries out over time; reapply if friction increases during use.
4. Dispose Properly: After use, fold the empty packet and throw it in the trash. Do not flush it down the toilet. Foil packets are not recyclable in most curbside programs, so check local guidelines if you prefer to recycle.

By Tantus Inc. Good Clean Fun | Published: 2026-10-27

Category: How-to Guides

Learn how to open, apply, and store Swiss Navy Water Based Lubricant foil packets. Get tips for travel, single-use convenience, and avoiding common mistakes.

Quick Answer

Tear open the Swiss Navy Water Based Lubricant foil packet along the notch, squeeze the gel onto your fingers or directly onto skin or toys, and spread it as needed. One packet provides enough lubrication for a single session.

Why Choose a Foil Packet?

Foil packets are ideal for travel, discreet carry, or trying a lubricant before committing to a full bottle. Swiss Navy Water Based Lubricant comes in a 5 mL single-use size that fits easily in a pocket, purse, or overnight bag.

Because it's water-based, it rinses off easily with water and won't stain fabrics. It's also safe to use with latex condoms and silicone or rubber toys, making it a versatile choice for most play scenarios.